HEAVY DUTY = 5:1 Ratio
Driveways & Workshop Floors (5:1)
Spray or bucket and broom floor, let sit for 10 minutes and hose or pressure spray off, agitate with brush or broom.
Degreasing Motor Parts (5:1)
Spray on or soak in solution, agitate with paint brush or similar, rinse off in water. Can be used in a dipping tank to soak parts.
Printing Ink (5:1)
To clean dampener rollers and remove ink from machines, floor and clothing.
Rusted & Frozen Bolts (5:1)
Soak in solution for 2 to 3 minutes, use spanner to loosen bolts.
Scuff Marks (5:1)
Soak in solution for 2 to 3 minutes and remove with dry absorbent towel.
Ovens, Hotplates, BBQ’s & Burnt Surfaces (5:1)
Pre heat oven/hot plate/surface to warm, apply generous amounts of spray to surface, scour stubborn areas and rinse. No nasty fumes !
Masking & Sticky Tape Residue (5:1)
Spray onto surface, place tissue paper over residue and respray, allow to sit for 5 minutes and simply rub off.
Panel Shops (5:1)
1 cap of concentrate into wet rub bucket eliminates static, silicone and oils build-up, prevents fish-eyes, swirls and bubbles. Removes over-spray off brake and tail lights, tyres, glass & interiors, silicone on door jams, tyres and interiors.
Cutting Compound (5:1)
Mix into compound instead of water to eliminate buff and swirl marks, remove ground in compound from mouldings.
Tile Grout / Bathroom Scum & Plaque (5:1)
Spray on allow to sit for 1-2 minutes scrub and remove with water or dry cloth.[back to top]
LIGHT & EXTRA LIGHT DUTY = 20:1 & 100:1 Ratio’s
Carpet & Upholstery (20:1)
To remove stains spray 5 to 10 cm from stain, agitate area with spray nozzle & absorb with clean dry cloth.
Silastic, Silicone & Urethane (20:1)
Spray product and remove excess with rag, spray again and rub on the spot.
Soft Leather Clothes & Shoes (20:1)
Spray on solution allow to sit for 1-2 mins and remove stains with clean dry cloth.
General Surface Cleaner (20:1)
Apply a mist over the whole area intended for cleaning, wipe off as normal.
Replaces dozens of other spray bottles !
Linoleum Floors (20:1)
Spray on solution allow to sit for 3-5 mins and mop with sponge mop. If a large area mix Olympic Cleen directly into the bucket, let sit then mop back with clean water.
Leather Bags & Luggage (20:1)
Spray on solution allow to sit for 5 mins and remove stains with a clean dry cloth.
Steam / Carpet Shampoo (20:1)
Apply directly into tank and spray as normal (solution can be varied to suit pressure)
more pressure = less solution. Pre-spray stubborn stains and clean as normal.
Jewellery (20:1)
Spray or soak in solution allow to sit for 20-30 mins and remove with clean dry cloth.
Finished wood Surfaces (20:1)
Spray on solution allow to sit for 5 to 10 mins and wash as normal.
Computer (20:1)
Mix solution & spray onto rag, wipe keyboards & mouse will de-static screen & no streaks
Windows & Glass (100:1)
Apply solution directly onto surface and polish as per normal.
Car Wash (100:1)
Mix 1-2 cap fulls into bucket, wash normally helps reduce streaking when drying.
Chrome (100:1)
Apply a mist over the whole area intended for polishing. Shine with clean dry cloth.
Marble & Granite (100:1)
Spray on solution allow to sit for 1-2 mins and remove with cloth or sponge.
Stainless Steel Food Surfaces (100:1)
Wipes streaks away.
[back to top]
MEDIUM DUTY = 10:1 Ratio
Bad Carpet Stains (10:1)
Spray 5 to 10 cm from stain, agitate area with spray nozzle or brush & absorb with clean dry cloth, mist and blend the surrounding area.
Chewing Gum (10:1)
Poke holes in gum, spray on & around, pour hot water over gum, let soak for 5 min, use a coin & agitate around gum until it releases from material or carpet. On fabric prone to water staining, spray mist over entire area and soak up with clean dry cloth.
Welding Spatter Guard (10:1)
Apply a mist over the whole area to be welded. Weld directly over area. No nasty silicone smoke or residue, ready for painting or powder coating.
Glass & Mirror Defogging (10:1)
Mist over area to be defogged, buff area dry with absorbent paper towel, area should remain defogged for 1-3 days. Also works on Perspex. Ideal for ski & welding goggles, safety glasses, scuba masks & grinding masks.
Nicotine build-up & Smoke Damage (10:1)
Spray on solution & allow to sit for 1-2 mins then remove with clean dry cloth.
Boats & Fibreglass (10:1)
Spray onto solution allow to sit for 1-2 mins and remove with dry absorbent cloth. Removes diesel stains, cleans non skid, upholstery, clears and weather marks on boats. Also great around the water line mark.
Wax Stripping (10:1)
Spray 5 to 10 cm from stain, scrub area and wipe away with clean dry cloth.
Floor Mats (10:1)
Spray mist over the entire area and soak up with clean dry cloth. Fresh lemon smell !
Paint Oxidation (10:1)
Cover area to be cleaned, buff area with clean dry cloth.
Mildew (10:1)
Spray on solution allow to sit for 1-2 mins and remove with pressured water or brush.
Laminex (10:1)
Spray on solution allow to sit for 1-2 mins and remove with dry cloth.
Brake Dust (10:1)
Spray on solution allow to sit for 5-10 mins and remove with pressured water or rag.
Outdoor Furniture (10:1)
Spray on solution allow to sit for 1-10 mins and pressure hose off mould & mildew or use dry rag.
Golf Clubs (10:1)
Cleans rust off clubs and cleans all vinyl and leather, bags and shoes, etc.
Plastics (10:1)
Spray on solution allow to sit for 2 mins and remove stains with clean dry cloth.
Stainless Steel Food Surfaces (10:1)
If soiled, spray on solution and wipe off with potable water as normal.
Laundry Pre-Spray (10:1)
Apply a mist over the whole area intended for washing. (Avoid satin, silk & suede)
[back to top] |
